ref: b502a62da2ec6058923db94f87ecc2d29db2fa77
dir: /os/boot.original/puma/l.s/
/* * File: l.s * Purpose: * Puma Board StrongARM 110 Architecture Specific Assembly * */ #include "mem.h" #include "armv4.h" #include "puma.h" #define DRAMWAIT 100000 /* 3.125μsec per iteration */ #define TL750R(r) (TL750_BASE+(r)*4) #define BOOTBASE 0x00200000 TEXT _main(SB),1,$-4 MOVW R15, R7 /* save PC on entry */ /* * initialise DRAM controller on the TL750 (SDRAM mode) */ MOVW $DRAMWAIT, R0 /* wait 312 ms after reset before touching DRAM */ dram1: SUB.S $1, R0 BNE dram1 MOVW $TL750R(0x103), R0 /* DMC_DELAY */ MOVW $0x03333333, R1 /* DRAM timing parameters */ MOVW R1, (R0) MOVW $TL750R(0x101), R0 /* DMC_SDRAM */ MOVW $0x03133011, R1 /* SDRAM parameters for Puma */ MOVW R1, (R0) MOVW $DRAMWAIT, R0 /* wait 312 ms for initialisation */ dram2: SUB.S $1, R0 BNE dram2 MOVW $setR12(SB),R12 /* * copy bootstrap to final location in DRAM */ MOVW R7, baddr(SB) MOVW $(BOOTBASE+8), R0 CMP R0, R7 BEQ inplace MOVW $((128*1024)/4), R6 copyboot: MOVW.P 4(R7), R5 MOVW.P R5, 4(R0) SUB.S $1, R6 BNE copyboot MOVW $bootrel(SB), R7 MOVW R7, R15 TEXT bootrel(SB), $-4 /* * set C environment and invoke main */ inplace: MOVW $mach0(SB),R13 MOVW R13,m(SB) ADD $(MACHSIZE-12),R13 /* disable MMU activity */ BL mmuctlregr(SB) BIC $(CpCmmu|CpCDcache|CpCwb|CpCIcache), R0 BL mmuctlregw(SB) BL main(SB) loop: B loop TEXT idle(SB),$0 RET /* * basic timing loop to determine CPU frequency */ TEXT aamloop(SB), $-4 /* 3 */ _aamloop: MOVW R0, R0 /* 1 */ MOVW R0, R0 /* 1 */ MOVW R0, R0 /* 1 */ SUB $1, R0 /* 1 */ CMP $0, R0 /* 1 */ BNE _aamloop /* 3 */ RET /* 3 */ /* * Function: setr13( mode, pointer ) * Purpose: * Sets the stack pointer for a particular mode */ TEXT setr13(SB), $-4 MOVW 4(FP), R1 MOVW CPSR, R2 BIC $PsrMask, R2, R3 ORR R0, R3 MOVW R3, CPSR MOVW R13, R0 MOVW R1, R13 MOVW R2, CPSR RET /* * Function: _vundcall * Purpose: * Undefined Instruction Trap Handler * */ TEXT _vundcall(SB), $-4 _vund: MOVM.DB [R0-R3], (R13) MOVW $PsrMund, R0 B _vswitch /* * Function: _vsvccall * Purpose: * Reset or SWI Handler * */ TEXT _vsvccall(SB), $-4 _vsvc: SUB $12, R13 MOVW R14, 8(R13) MOVW CPSR, R14 MOVW R14, 4(R13) MOVW $PsrMsvc, R14 MOVW R14, (R13) B _vsaveu /* * Function: _pabcall * Purpose: * Prefetch Abort Trap Handler * */ TEXT _vpabcall(SB), $-4 _vpab: MOVM.DB [R0-R3], (R13) MOVW $PsrMabt, R0 B _vswitch /* * Function: _vdabcall * Purpose: * Data Abort Trap Handler * */ TEXT _vdabcall(SB), $-4 _vdab: MOVM.DB [R0-R3], (R13) MOVW $(PsrMabt+1), R0 B _vswitch /* * Function: _virqcall * Purpose: * IRQ Trap Handler * */ TEXT _virqcall(SB), $-4 /* IRQ */ _virq: MOVM.DB [R0-R3], (R13) MOVW $PsrMirq, R0 B _vswitch /* * Function: _vfiqcall * Purpose: * FIQ Trap Handler * */ TEXT _vfiqcall(SB), $-4 /* FIQ */ _vfiq: MOVM.DB [R0-R3], (R13) MOVW $PsrMfiq, R0 /* FALLTHROUGH */ _vswitch: /* switch to svc mode */ MOVW SPSR, R1 MOVW R14, R2 MOVW R13, R3 MOVW CPSR, R14 BIC $PsrMask, R14 ORR $(PsrDirq|PsrDfiq|PsrMsvc), R14 MOVW R14, CPSR MOVM.DB.W [R0-R2], (R13) MOVM.DB (R3), [R0-R3] _vsaveu: /* Save Registers */ SUB $4, R13 /* save link */ MOVW R14, (R13) /* MOVW.W R14,4(R13)*/ SUB $8, R13 MOVW R13, R14 /* ur->sp */ ADD $(6*4), R14 MOVW R14, 0(R13) MOVW 8(SP), R14 /* ur->link */ MOVW R14, 4(SP) MOVM.DB.W [R0-R12], (R13) MOVW R0, R0 /* gratuitous noop */ MOVW $setR12(SB), R12 /* static base (SB) */ MOVW R13, R0 /* argument is ureg */ SUB $8, R13 /* space for arg+lnk*/ BL trap(SB) _vrfe: /* Restore Regs */ MOVW CPSR, R0 /* splhi on return */ ORR $(PsrDirq|PsrDfiq), R0, R1 MOVW R1, CPSR ADD $(8+4*15), R13 /* [r0-R14]+argument+link */ MOVW (R13), R14 /* restore link */ MOVW 8(R13), R0 MOVW R0, SPSR MOVM.DB.S (R13), [R0-R14] /* restore user registers */ MOVW R0, R0 /* gratuitous nop */ ADD $12, R13 /* skip saved link+type+SPSR*/ RFE /* MOVM.IA.S.W (R13), [R15] */ /* * Function: splhi * Purpose: * Disable Interrupts * Returns: * Previous interrupt state */ TEXT splhi(SB), $-4 MOVW CPSR, R0 ORR $(PsrDirq|PsrDfiq), R0, R1 MOVW R1, CPSR RET /* * Function: spllo * Purpose: * Enable Interrupts * Returns: * Previous interrupt state */ TEXT spllo(SB), $-4 MOVW CPSR, R0 BIC $(PsrDirq), R0, R1 MOVW R1, CPSR RET /* * Function: splx(level) * Purpose: * Restore interrupt level */ TEXT splx(SB), $-4 MOVW R0, R1 MOVW CPSR, R0 MOVW R1, CPSR RET /* * Function: islo * Purpose: * Check if interrupts are enabled * */ TEXT islo(SB), $-4 MOVW CPSR, R0 AND $(PsrDirq), R0 EOR $(PsrDirq), R0 RET /* * Function: cpsrr * Purpose: * Returns current program status register * */ TEXT cpsrr(SB), $-4 MOVW CPSR, R0 RET /* * Function: spsrr * Purpose: * Returns saved program status register * */ TEXT spsrr(SB), $-4 MOVW SPSR, R0 RET /* * MMU Operations */ TEXT mmuctlregr(SB), $-4 MRC CpMMU, 0, R0, C(CpControl), C(0) RET TEXT mmuctlregw(SB), $-4 MCR CpMMU, 0, R0, C(CpControl), C(0) MOVW R0, R0 MOVW R0, R0 RET /* * Cache Routines */ /* * Function: flushIcache * Purpose: * Flushes the *WHOLE* instruction cache */ TEXT flushIcache(SB), $-4 MCR CpMMU, 0, R0, C(CpCacheCtl), C(5), 0 MOVW R0,R0 MOVW R0,R0 MOVW R0,R0 MOVW R0,R0 RET /* * Function: flushDentry * Purpose: * Flushes an entry of the data cache */ TEXT flushDentry(SB), $-4 MCR CpMMU, 0, R0, C(CpCacheCtl), C(6), 1 RET /* * Function: drainWBuffer * Purpose: * Drains the Write Buffer */ TEXT drainWBuffer(SB), $-4 MCR CpMMU, 0, R0, C(CpCacheCtl), C(10), 4 RET /* * Function: writeBackDC * Purpose: * Drains the dcache prior to flush */ TEXT writeBackDC(SB), $-4 MOVW $0xE0000000, R0 MOVW $8192, R1 ADD R0, R1 wbflush: MOVW (R0), R2 ADD $32, R0 CMP R1,R0 BNE wbflush RET /* * Function: flushDcache(SB) * Purpose: * Flush the dcache */ TEXT flushDcache(SB), $-4 MCR CpMMU, 0, R0, C(CpCacheCtl), C(6), 0 RET /* * Function: writeBackBDC(SB) * Purpose: * Write back the Baby D-Cache */ TEXT writeBackBDC(SB), $-4 MOVW $0xE4000000, R0 MOVW $0x200, R1 ADD R0, R1 wbbflush: MOVW (R0), R2 ADD $32, R0 CMP R1,R0 BNE wbbflush MCR CpMMU, 0, R0, C(CpCacheCtl), C(10), 4 MOVW R0,R0 MOVW R0,R0 MOVW R0,R0 MOVW R0,R0 RET GLOBL mach0+0(SB), $MACHSIZE GLOBL m(SB), $4 GLOBL baddr(SB), $4