ref: 44ce0097b612a1fefd754065bdf8d9d2e5ef60c8
dir: /man/8/mangaload/
.TH MANGALOAD 8 .SH NAME mangaload \- send new kernel to MANGA bootstrap .SH SYNOPSIS .B auxi/mangaload [ .B -48dr ] .I host .I image .SH DESCRIPTION .I Mangaload uses an ICMP protocol unique to the Peplink MANGA™ firewall to send a new kernel .I image to the MANGA bootstrap monitor to burn into flash, replacing the existing kernel image. To start the loading process, connect to the device's console on its serial port (38400 baud, 8 bits, no parity, 1 stop bit, no flow control), power the device off then on again, and when the .B MANGA prompt appears, quickly type the letter .BR f . Then run .I mangaload to load the kernel; the device should give status updates as the kernel loads, and as it burns the image into flash. When it has finished, power the device off and on again to start the new kernel. .PP By default, .I mangaload assumes a 4 Mbyte flash on the device; the .B -8 option sets it to 8 Mbytes. The .B -r option causes the .I image to be loaded into another, larger flash region, used by Linux for its initial root, which can be used by Inferno for general storage. The .B -d option prints a trace of the protocol, for debugging. .SH SOURCE .B /appl/cmd/auxi/mangaload.b .br .B /os/manga .SH SEE ALSO .IR bootpd (8), .IR tftpd (8)