ref: e81c54ba2ecc673a4d5f8aed0e9b52841fe07b0d
dir: /man/1/avr/
.TH AVR 1 .SH NAME avr \- Atmel AVR support .SH SYNOPSIS .B avr/burn .RB [ -e ] .RB [ -r ] [ .BI "-d " device ] .I file.srec .SH DESCRIPTION Currently there is just one Inferno application to support Atmel AVRs but others should appear. .PP .I Burn initialises or verifies the contents of an Atmel ATmega128 AVR. The programming board must be connected to a serial port (see .IR eia (3)), .B /dev/eia0 by default. .I File.srec is a file containing the desired flash contents in Motorola S-record format, as produced by .IR ms2 (10.1). By default, .I burn erases the AVR chip (both flash and EEPROM), then loads the flash with the contents of .IR file.srec . The .B -e option stops .I burn from erasing first, allowing additional code or data to be loaded (but only into an already-erased region). If the .B -r option is given, .I burn instead compares the contents of the AVR with the data in .IR file.srec . .I Burn supports the MIB510 programming board from Crossbow Technology Inc. .SH SOURCE .B /appl/cmd/avr/burn.b .SH "SEE ALSO" .IR eia (3), .IR ms2 (10.1)